Type
Seamless copper coated wire Type P1
classification
AWS
A 5.23: F8A4-ECA1
EN ISO
24598-A: S T Mo FB
Toepassingen
SA CW Mo is a cored wire for 0.5%Mo steels, i.e. P1. These steels are commonly used at service temperatures up to 500 °C and for some sub-zero structural applications.
Type
Seamless copper coated wire Type P1
Toepassingen
SA CW Mo is a cored wire for 0.5%Mo steels, i.e. P1. These steels are commonly used at service temperatures up to 500 °C and for some sub-zero structural applications.
Eigenschappen

The 0.5% alloying improves creep performance compared to CMn steels and sees the alloy being used for boiler, pressure vessel and piping construction.
Typical with FL 155 Flux or FL 160

Classificatie
AWS
A 5.23: F8A4-ECA1
EN ISO
24598-A: S T Mo FB
F-nr
6
FM
4
Geschikt voor

S355J0, E335, P285NH, P310GH, S355J0Cu, 16Mo3, P315N - S420N, P315NH - P420NH fine grain structural steels up to S460N/P460N, large-diameter pipes up to L485MB

Lasposities
PA
PB
PC
Herdrogen
Not required
Analyse
C Si Mn P S Cr Ni Mo Nb Ti V N Cu Al Zr Nb+Ta
0.1 0.2 0.09 0.02 0.02 0.5
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
-20°C -40°C
675°C- 705°C 1h 490 570 24 120 80 HRc
productblad
conformiteitsverklaring
productblad
vraag offerte