NiCrBSi 6 Tig (Colmonoy 6) | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Nickel based Tig filler metal for hardfacing and overlay applications.

classification

AWS

A 5.21: ERNiCr-C

Toepassingen

NiCrBSi 6 TIG offers outstanding metallurgical and physical properties making them ideally suited to solving wear mechanisms such as abrasion, erosion, corrosion and high-temperatures encountered in service.

Type

Nickel based Tig filler metal for hardfacing and overlay applications.

Toepassingen

NiCrBSi 6 TIG offers outstanding metallurgical and physical properties making them ideally suited to solving wear mechanisms such as abrasion, erosion, corrosion and high-temperatures encountered in service.

Eigenschappen

This nickel based alloy offers superior wear protection, retaining its hardness up to 600ºC (1000ºF) with significant resistance to oxidation.

Classificatie

AWS

A 5.21: ERNiCr-C

Geschikt voor

Aircraft gas turbines, steam turbine powerplants, turbochargers and valves in reciprocating engines, prosthetic devices, heat treating equipment, pollution control equipment, coal gasification and liquefaction systems, and components in pulp and paper mills.

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

I1

Analyse

C	Ni	Cr	B	Si	Fe
0.7	Rem.	14	3	4.25	4

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				55.5 HRc

productblad

prestatieverklaring

conformiteitsverklaring

VIB

productblad

VIB

NiCrBSi 6 Tig Colmonoy 6

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.