L-Ag55Sn F | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

High Silver containing Cadmium free brazing Alloy.

classification

AWS

A 5.8: BAg-7

EN ISO

17672: Ag 156

Toepassingen

Joining: Steels, Cast iron, Copper, Copper alloys, Stainless steel, Nickel and Nickel alloys. Also suitable for dissimilar joints between these metals. Do not use this alloy above working temperatures of 200 ºC

Type

High Silver containing Cadmium free brazing Alloy.

Toepassingen

Joining: Steels, Cast iron, Copper, Copper alloys, Stainless steel, Nickel and Nickel alloys. Also suitable for dissimilar joints between these metals. Do not use this alloy above working temperatures of 200 ºC

Eigenschappen

CEWELD L-Ag55Sn F is a flux-coated brazing rod (F). It is a universal silver brazing alloy without Cadmium with low operating temperature and high mechanical properties. Due to the addition of Sn. this alloy will show a bright looking joint and is more capillary then the standard silver brazing alloys.

Classificatie

AWS

A 5.8: BAg-7

EN ISO

17672: Ag 156

Geschikt voor

Brazing: Steels, Cast iron, Copper, Copper alloys, Stainless steel, Nickel and Nickel alloys. Also suitable for dissimilar joints between these metals.

Lasposities

Herdrogen

Not required

Melting range

620 - 650°C

Gas acc. EN ISO 14175

None

Analyse

Si	Mn	P	Ni	Fe	Cu	Zn	Pb	Sn	Al	Mg	Ag	Pd	Cd
					22	18		5			56

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded		400		HRc

productblad

prestatieverklaring

conformiteitsverklaring

VIB

productblad

VIB

L-Ag55SnF fluxcoated silver brazing rod for copper, brass, steel, tungsten and cast iron

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.