E NiCrMo C4 | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Nickel based electrode for NiCrMo C4 welding

classification

AWS

A 5.11: E NiCrMo-7

EN ISO

14172: E Ni 6455

Toepassingen

CEWELD E NiCrMo C4 is used for welding nickel-chromium-molybdenum alloy, for welding of the clad side of joints in steel clad with nickel-chromium-molybdenum alloy, and for joining nickel-chromium-molybdenum alloys to steel and to other nickel-base alloys

Type

Nickel based electrode for NiCrMo C4 welding

Toepassingen

CEWELD E NiCrMo C4 is used for welding nickel-chromium-molybdenum alloy, for welding of the clad side of joints in steel clad with nickel-chromium-molybdenum alloy, and for joining nickel-chromium-molybdenum alloys to steel and to other nickel-base alloys

Eigenschappen

Due to the combination of chromium with high molybdenum content receives CEWELD E NiCrMo C4 exceptional resistance to a variety of chemical media such as contaminated, reducing mineral acids, chlorides and organic as well as inorganic chloride contaminated media.

Classificatie

AWS

A 5.11: E NiCrMo-7

EN ISO

14172: E Ni 6455

F-nr

43

FM

6

Geschikt voor

Alloy C4

ASTM B574, B575, B619, B622, B626

UNS N06455

Lasposities

Herdrogen

140°C / 1 hr

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	Ti	V	Fe	W	Co	Cu	Al	Nb+Ta
0.01	0.11	0.9	0.01	0.001	16.3	Rem.	14.8	0.2		0.5		0.7

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded	430	710	31	HRc

productblad

prestatieverklaring

conformiteitsverklaring

VIB

productblad

VIB

Welding electrode for Alloy C4

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.