AA NiCrSiB 40 | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

High-alloyed tubular wire on a Ni-Cr-Si-B basis for high wear protection in several applications.

classification

EN ISO

14700: T Ni1

Toepassingen

The characteristics of the deposit are comparable with cobalt-base alloys and offers excellent corrosion resistance, heat resistance and thermal shock constancy.

Type

High-alloyed tubular wire on a Ni-Cr-Si-B basis for high wear protection in several applications.

Toepassingen

The characteristics of the deposit are comparable with cobalt-base alloys and offers excellent corrosion resistance, heat resistance and thermal shock constancy.

Eigenschappen

Very good corrosion resistance combined with high hardness even at higher temperatures. Excellent weldability and often used as economical alternative for „stellite“.The alloy is spark free and non magnetic.

Classificatie

EN ISO

14700: T Ni1

Geschikt voor

rotary seal rings, pumps, sleeves, food industry, nuclear, screw conveyors, winches.

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

I1

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	N	Fe	W	B	Co	Cu	Al
0.35	4.5	0.5	22	80						4	1.5

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				40 HRc

productblad

prestatieverklaring

conformiteitsverklaring

VIB

productblad

VIB

AA NiCrSiB 40

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.