Selectarc INOX 430MoB
Merk
Ceweld product
Type
High recovery, corrosion resistant stainless steel stick electrode
classification
AWS
A 5.4: ~E 430HMo-26
EN ISO
3581-A: ~E Z 17 1 B 42
W.Nr.
1.4115
Toepassingen
Hardfacing shafts from stainless steel parts, molt repairs, rebuilding pump parts etc. Suitable for plating and joining equal and similar ferritic Cr-steels and cast steels. Proper weldings are subject to the recommended heat treatment. This alloy is specially suitable for sealing surfaces on water-, steam and gas-valves, especially for sulphuric gases. The deposit is resistant to seawater, thin acids and scale resistant in air and oxidizing gases up to 950°C . The weld deposit can be tempered.
Type
High recovery, corrosion resistant stainless steel stick electrode
Toepassingen
Hardfacing shafts from stainless steel parts, molt repairs, rebuilding pump parts etc. Suitable for plating and joining equal and similar ferritic Cr-steels and cast steels. Proper weldings are subject to the recommended heat treatment. This alloy is specially suitable for sealing surfaces on water-, steam and gas-valves, especially for sulphuric gases. The deposit is resistant to seawater, thin acids and scale resistant in air and oxidizing gases up to 950°C . The weld deposit can be tempered.
Eigenschappen
High deposition rate and excellent weldability on DC +. Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding components where heat and corrosion resistance simmilar to AISI 304 is required. The weld deposit can sustain working temperatures up to 450° C. and will offer a high hardness and wear resistance.
Classification
AWS
A 5.4: ~E 430HMo-26
EN ISO
3581-A: ~E Z 17 1 B 42
F-nr
1
FM
5
W.Nr.
1.4115
Geschikt voor
1.4122 (G)X35CrMo17, 1.4313, 1.4000, 1.4001, 1.4002, Cast steels
Lasposities
Mechanische waarden
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | >300 | >450 | >15 | 43 HRc |
| 720°C±15°C 2h | >300 | >450 | >15 | 200 HB |