SELECTARC 18/15

Merk
Selectarc
Ceweld product
Type
Solid Mag stainless steel welding wire with high Molybdenium content.
classification
AWS
A 5.9: ER317L
EN ISO
14343-A: G 18 15 3 L
W.Nr.
1.4438
Toepassingen
For welding stabilized and un-stabilized CrNiMo(N) type of steels with high corrosion resistance. Also suitable for dissimilar welds between steel and stainless steel or dissimilar stainless steels. CEWELD 317L has good resistance to general corrosion and pitting due to its high content of molybdenum. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The alloy is used in severe corrosion conditions such as in the petrochemical, pulp, cotton and paper industries.
Type
Solid Mag stainless steel welding wire with high Molybdenium content.
Toepassingen
For welding stabilized and un-stabilized CrNiMo(N) type of steels with high corrosion resistance. Also suitable for dissimilar welds between steel and stainless steel or dissimilar stainless steels. CEWELD 317L has good resistance to general corrosion and pitting due to its high content of molybdenum. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The alloy is used in severe corrosion conditions such as in the petrochemical, pulp, cotton and paper industries.
Eigenschappen

Austenitic, non magnetic stainless steel alloy with high mechanical properties and excellent weldability, corrosion resistance is better than AISI 316 due to the high Mo. content. Suitable for use up to 400°C

Classification
AWS
A 5.9: ER317L
EN ISO
14343-A: G 18 15 3 L
F-nr
6
FM
5
W.Nr.
1.4438
Geschikt voor

Designed for joining corrosion resistant CrNiMoN steel as well as for austenitic-ferritic joints.

ISO 15608: 8.1  Austenitic ≤ 19 % Cr , TÜV 1000: Gr. 26, 27, 28

1.4429, 1.4434, 1.4435, 1.4436, 1.4438, 1.4439, 1.4453, 1.4583, 

X2CrNiMoN 17 13 5, X2CrNiMoN 17 13 3, X2CrNiMo 18 15 4, X10CrNiMoNb 18 12, X2CrNiMoN17-13-3, X2CrNiMoN18-12-4, X2CrNiMo18-14-3, X3CrNiMnMoN19-16

UNS S31600, S31653, S31703, S31726, S31753

AISI 316Cb, 316L, 316LN, 317L, 317LN, 317LMN

Goedkeuringen
CE
Lasposities
PA
PB
PC
PD
PE
PF
Herdrogen
Not required
Gas acc. EN ISO 14175
M13, M12
Analyse
C Si Mn P S Cr Ni Mo Nb N Cu W
0.01 0.45 1.4 0.02 0.01 18.8 13.6 3.5 0.12
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT -40°C
As Welded 465 550 35 128 70 HRc
Product sheet
declaration of performance
declaration of conformity
MSDS
product sheet
Ask quotation
MSDS