TeroMatec 4660

Marque
Castolin Eutectic
Ceweld product
Type
High-alloyed tubular wire on a C-Cr-Nb carbide basis for extreme hard deposits on parts subject to strong mineral abrasion, weldable without protective gas.
classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-60-G
Applications
Cladding and rebuilding parts that are subject to severe abrasion.
Type
High-alloyed tubular wire on a C-Cr-Nb carbide basis for extreme hard deposits on parts subject to strong mineral abrasion, weldable without protective gas.
Applications
Cladding and rebuilding parts that are subject to severe abrasion.
Propriétés

Extreme abrasion resistant with reasonable impact properties and temperature resistance up to 300ºC. Due to the combination Cr and Nb carbides the deposit structure contains very fine particles that results in excellent wear resistance against heavy abrasion. Usualy the maximum number of layers is 2 till 3 but when using a special stringer build up technick with release cracks, upto 15 layers is also possible.

Classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-60-G
Convient pour

Sand and earth moving equipment such as buckets and teeth, dredge buckets, coke hammers, crushing equipment, rockwool rolls and brick industry, cement rollers, tables, Nihard and Mohard parts without buffer layer, slurry pumps, loaders, wear plates etc.

Equivalent in SMAW: CEWELD® Dur 62S, Dur 63Nb

Positions de soudage
PA
PB
PC
Etuvage
140°C / 24 hr
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
5 1 0.4 22 7 Rem.
Propriétés mécaniques
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 62 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS