SP 1.4115 | Certilas: The filler metal specialist

Go Back

PRODUCT SPECIFICATIONS
PACKAGING
Ask quotation

Type

Solid metal spray wire

classification

EN ISO

14919: 5.8

W.Nr.

1.4115

Applications

Corrosion coating, with wear properties

Type

Solid metal spray wire

Applications

Corrosion coating, with wear properties

Properties

SP 1.4115 combines high toughness with very good corrosion resistance.

Classification

EN ISO

14919: 5.8

W.Nr.

1.4115

Suitable for

Flame spray, electric spray and high speed flame spray.

Welding positions

Redrying

Not required

Analysis

Si	Mn	Cr	Ti	Fe	B	Cu	Zn	Sn	Al	Mg	C	S	P	Pb	Ni	Mo	Nb	W	As
0.5	0.5	13		Rem.							0.2					1.1

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				45 HRc

Product sheet

declaration of performance

declaration of conformity

SP 1.4115 1,6mm
Packaging	KG/unit	EanCode
BS-300	15	8720663409867

Product sheet

Ask quotation

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.

CEWELD SP 1.4115