Powder Nickel 3 (-106/20 µm) | Certilas: The filler metal specialist

Go Back

PRODUCT SPECIFICATIONS
PACKAGING
Ask quotation

Type

Gas atomized Nickel spray powder (NiBSi), suitable for spray - fuse and Cast iron welding.

Applications

.

Type

Gas atomized Nickel spray powder (NiBSi), suitable for spray - fuse and Cast iron welding.

Applications

.

Properties

high wear resistance. Good corrosion resistance in various media. Good machineability after fusion. Coatings are gas tight and metallurgically bonded to substrates due to diffusion.
▪ hardness: HRC 22-25
▪ applicable up to approx. 820 °C

Suitable for

.

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

None

Analysis

B	C	Co	Cr	Fe	Ni	Si	Other
1.75	0.03	0.02	0.05	0.12	Rem.	2.6	0.1

Product sheet

declaration of performance

declaration of conformity

Product sheet

Ask quotation

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.