Type
Seamless medium alloyed basic fluxcored wire with slag for hardfacing using Ar-CO2 mix
classification
EN ISO
14700: T Fe4
Applications

Rebuilding and cladding parts against strong abrasion and heavy impact.

Type
Seamless medium alloyed basic fluxcored wire with slag for hardfacing using Ar-CO2 mix
Applications

Rebuilding and cladding parts against strong abrasion and heavy impact.

Properties

Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer except on materials considered critical. In this situation CEWELD® ER 100 S-G is recommended. Suited for wear parts subject to heavy impact and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first layer. For material considered critical to cracking we advise to buffer with one layer CEWELD® AA B460.

Classification
EN ISO
14700: T Fe4
Suitable for

55-62 HRc hardfacing alloy against heavy impact and shock, bucket, loaders, crusher jaws, crusher cones, pumps, sand, snow scratchers, stone cutting tools etc.

Welding positions
PA
PB
Redrying
Not required
Gas acc. EN ISO 14175
M21
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.5 0.6 1.5 6 0.5
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 60 HRc
Product sheet
declaration of conformity
Product sheet
Ask quotation