SELECTARC M13/4

Brand
Selectarc
Ceweld product
Type
Solid stainless steel wire for joining and cladding.
classification
AWS
A 5.9: ER410NiMo
EN ISO
14343-A: G 13 4
W.Nr.
1.4351
Applications

CEWELD® 410NiMo is used for welding similar martensitic and martensitic-ferritic steels in various applications such as water turbines, compressor construction, steam power plant construction, continuous casting rolls, centrifuges, valves, Pelton and Francis turbines.

Type
Solid stainless steel wire for joining and cladding.
Applications

CEWELD® 410NiMo is used for welding similar martensitic and martensitic-ferritic steels in various applications such as water turbines, compressor construction, steam power plant construction, continuous casting rolls, centrifuges, valves, Pelton and Francis turbines.

Properties

CEWELD 410NiMo has comparable properties to steels of the same or similar types. It is resistant to water and steam.

The preheating and interpass temperature should be 100 - 160°C for thick-walled parts.

The heat input should be max. 15 kJ/cm. Annealing at 580 - 620°C is possible.

Classification
AWS
A 5.9: ER410NiMo
EN ISO
14343-A: G 13 4
F-nr
6
FM
5
W.Nr.
1.4351
Suitable for

13%Cr - 4%Ni - 0,5%Mo Steel 

1.4000, 1.4001, 1.4002, 1.4313, 1.4317, 1.4407, 1.4413, 1.4414,   

GX4CrNi13-4, X3CrNiMo13-4, GX5CrNiMo13-4, GX4CrNiMo13-4, X 6 Cr 13, X 7 Cr 14, X 6 CrAl 13

ACI Gr. CA 6 NM

Approvals
CE
Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
M12
Analysis
C Si Mn P S Cr Ni Mo Nb N Cu W Co
0.02 0.4 0.4 12 4.5 0.5 0.07 0.1
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT -20°C
As Welded 650 790 15 50 38 HRc
580°C±15°C 8h 765 840 18 50 40 250 HB
Product sheet
declaration of performance
declaration of conformity
MSDS
product sheet
Ask quotation
MSDS