HARDFACE 19 9 6

Brand
Welding Alloys Group
Ceweld product
Type
High alloyed flux-cored wire for joining difficult to weld steel and buffer layers prior to hard facing.
classification
EN ISO
14700: T Fe10
Applications

Repair jobs where high strength and toughness is required. Joining austenitic manganese steels with themselves or with other steels. Buffer layer before hardfacing and maintenance on hard-to-weld steels. Armour plate and Joining 14% manganese steels.

Type
High alloyed flux-cored wire for joining difficult to weld steel and buffer layers prior to hard facing.
Applications

Repair jobs where high strength and toughness is required. Joining austenitic manganese steels with themselves or with other steels. Buffer layer before hardfacing and maintenance on hard-to-weld steels. Armour plate and Joining 14% manganese steels.

Properties

Special flux cored self shielded stainless steel wire for open arc weldingThe weld beads produced have a self-releasing slag covering that leaves a clean surfaceSound deposits are obtained even in the presence of cross draughtsPrimary choice for cladding and rebuilding application, suitable for joining and claddingProvides maximum productivity for outdoor jobs

Classification
EN ISO
14700: T Fe10
Suitable for

19% Cr / 9% Ni / 7% Mn, ISO 15608: 8.1 Cr ≤ 19 %

1.3401, 1.5637, 1.5680, 1.4370

X 20 Cr 13, X 8 Cr 17, X 22 CrNi 17,  X 5 CrNi 17, G-X 20 Cr 14 mix S355

42CrMo4, C45, 42MnV7, X120Mn12, 10 Ni 14, 12 Ni 19 etc.

ASTM 307, 304, (409, 403, 405, 410, 420, 430, 440, 501, 502)

Amor, Z 120 M 12 , 

Welding positions
PA
PB
PC
Redrying
Not required
Analysis
C Mn Cr Ni Mo Nb V Fe W Co Cu Al Si Ti B N
0.03 6.8 19.5 8.5
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 400 HB
Product sheet
MSDS
product sheet
Ask quotation
MSDS