Type
Sintered hardfacing strip for rebuilding and overlay applications.
classification
EN ISO
14700: C Fe8
Anwendungen
Rebuilding wornout parts such as screws, chrusher hammers, drive tumblers, chrusher rolls, dredging parts etc...
Type
Sintered hardfacing strip for rebuilding and overlay applications.
Anwendungen
Rebuilding wornout parts such as screws, chrusher hammers, drive tumblers, chrusher rolls, dredging parts etc...
Eigenschaften

The weld deposit offers excellent wear resistance against shocks and abrasion as well. Already the first layer gives excellent results even on mild steel due to the low dilution of the electro slag process. Due to the low dilution with the base metal a hardness exceeding 50 HRc can be achieved already in the first layer. Multiple layers can be applied to obtain full hardness at the final layer. Flux to be used FL 830 ESH

Klassifikation
EN ISO
14700: C Fe8
Geeignet für

52-58 HRc electro slag and / or submerged arc strip for hardfacing against schock and wear, Rebuilding wornout parts such as screws, chrusher hammers, drive tumblers, chrusher rolls, dredging parts etc..

For ESW welding FL 830 ESHC should be used as welding flux to obtain the results mentioned in this datasheet.

Schweißpositionen
PA
Rücktrocknung
Not required
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.33 2.8 7 0.25 1.7 0.25 1.8
Mechanische Gütewerte
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 56 HRc
Produktblatt
Konformitätserklärung
Produktblatt
Bitte um Angebot