E DUR R | Certilas: The filler metal specialist

Go Back

Produktspezifikationen
Verpackung
Bitte um Angebot

Type

Stick Electrodes with a Iron based tubular core wire with tungsten carbides

classification

EN ISO

14700: E Fe20

Anwendungen

Mining, Concrete recycling, drilling

Type

Stick Electrodes with a Iron based tubular core wire with tungsten carbides

Anwendungen

Mining, Concrete recycling, drilling

Eigenschaften

High resistance against wear

Klassifikation

EN ISO

14700: E Fe20

Geeignet für

Hardfacing drill points, Augers, Impellors, Mixer blades, Stone crushing equipment, Deep drilling,

Schweißpositionen

Rücktrocknung

Not required

Analyse

WSC	C	Fe
Rem.	3.7	40

Mechanische Gütewerte

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				60 HRc
As Welded				2000 HV

Produktblatt

Leistungserklärung

Konformitätserklärung

SDB

Produktblatt

Bitte um Angebot

SDB

tubular welding rod with tungsten carbides for hardfacing

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.